Highlights
Hidden casement design
Laminated timber frame
Casement with milled glass bead
Welded aluminium corners
Ventilated rear construction
Large revolving water chambers
Excellent thermal performance
Ideal for curtain walling insets
Slanted or arched windows possible
Visually Apealing Sash Design
General Description
The essential formation characteristic of BRAGA Integral system
is the masked casement with the narrow frame exterior.
Fixed glazing and casements are not architecturally
distinguishable from the outside. The design provides
a maximum of light entry.
The diverse range of profiles leaves no design wishes
unfulfilled: The system is ideal for panel windows in mulliontransom
curtain walls. Windows, doors and fixed glazing are
also usable as single windows and window hinges in
masonry.
The BRAGA Integral wood-aluminum system is based on the classic
basic design for wood-aluminum systems, with the same
wood thicknesses for casements and frames. Together with
the fashionable, milled glass bead of the casements, this
design is an especially economical and efficient woodaluminum
window construction option.
All kinds of slanted windows and round arches can
also be provided.
The frame connections can be carried out either welded
or with stable, punched corner connections: Element sizes
up to 3.5 x 2.5 m are available.
Structure
The reception of the glass is protected in the wooden groove.
The edge of the insulation-glass pane is thus well insulated
against heat loss. The glass is placed into the casement
from the outside, covered with a stable glass bead and a
vulcanized gasket frame, and sealed.
The inner sealing toward the glass can be accomplished
with gray or black glazing gaskets, as desired, or implemented
with silicone. The aluminum frames are generously
rear-ventilated and are fastened to the wood tension-
free with stable holders: That lets the wood breathe, and
the aluminum frame expand under temperature fluctuations
without hindrance.
The aluminum shell is the weather-protective element, and
also an architectural element which can be color-designed
at will. The wooden frame provides stability and outstanding
insulation, and gives the house a pleasantly comfortable
character.
Circumferential gaskets at the casements and rod frames
provide reliable insulation and noise protection. If necessary,
they can also be sealed with system gaskets between the
aluminum frame and the casements.
The groove drainage is normally accomplished invisibly and
without bothersome drainage caps.
Thermal Performance
BRAGA Integral achieves very good insulation values
of 1.8 W/m²K at the frame Uf as per DIN EN ISO 10077-2.
BRAGA Integral has the certification of Load Group C,
DIN 18055, Air-Tightness Level 4 as per DIN EN 12207, and
Driving-Rain Tightness 9a as per DIN EN 12208.
Uw values depending on:
• the respective glazing (Ug values)
• the type of wood (softwood or hardwood)
• the glass separator (standard aluminum or Thermix system)
Assumption: Window size 1230 mm x 1480 mm (test-window dimensions), single tilt&turn sash.
Ug in W/m²K |
Uw in W/m²K softwood, aluminium separator |
Uw in W/m²K softwood, "Thermix" separator |
Uw in W/m²K hardwood, aluminium separator |
Uw in W/m²K hardwood, "Thermix" separator |
| Calculation of Uw Values as per DIN EN ISO 10077-2 |
| 1.0 |
1.417 |
1.344 |
1.532 |
1.460 |
| 1.1 |
1.486 |
1.413 |
1.601 |
1.528 |
| 1.2 |
1.554 |
1.481 |
1.669 |
1.596 |
| 1.3 |
1.622 |
1.550 |
1.738 |
1.665 |
| 1.4 |
1.691 |
1.618 |
1.806 |
1.733 |
| 1.5 |
1.759 |
1.686 |
1.875 |
1.802 |
| 1.6 |
1.828 |
1.755 |
1.943 |
1.870 |
| 1.7 |
1.896 |
1.823 |
2.011 |
1.938 |
| 1.8 |
1.965 |
1.892 |
2.080 |
2.007 |