Highlights
- The NORDWIN aluminium system may be mounted without changes in the wood cross-section.
- The additional processing of glass beads, which is normally time-consuming and costly, is not necessary here as the aluminium sash profile replaces the glass beads.
- Aluminium frames are mounted field-by-field onto a multipart window, which allows for efficient installation of the aluminium frames.
- Mullion, transom, fixed glazing, double rebated, and component coupling are possible as well.
- Profiles create clear lines with small radii at the exposed edge.
- Frame connections are either welded or available with sturdy, punched corner joints.
- System can be used New Builds, Existing renovations, Refurbishment.
|
Choice of Look
 |
Side hung |
 |
Top guided / Top sliding |
 |
Top hung |
|
General DescriptionAvailable timber for GUTMANN NORDWIN manufacture:
- Engineered pine
- Sipo (hardwood)
Wooden products are painted in accordance with the RAL colour palette and varnished in accordance with the TEKNOS (Finland) colour palette. Clear varnish can also be used. At client's request wooden products can be oiled with TEKNOS oil "Woodex", designed for timber. Note: Windows are not varnished from outside Aluminium is painted in accordance with the RAL colour palette or it is anodized (i.e. surface of aluminium is covered with oxide layer by means of electrolysis, darkly grey colour is produced).
Ironmongeries: Windows, balcony doors, entrance doors – PN www.pn.dk/uk/;
Trickle vents: Available colours: anodised (natural aluminium colour), brown and white.
- Duco (Belgium)
- Trimvent 90 (England)
- Aereco (France)
- Renson (Belgium)
|
Technical information:
Outward opening window
U-value: 1.41 W/m2K
Glazing: Double glazed argon filled with LOW E coating as standard.
Frame: Composite timber/aluminium
Aluminium cladding available in any colour from RAL classic, RAL design, NCS colour chart.
Available Nordwin doors:
Outward opening doors available in Nordwin profile:
- 1.Single leaf doors.
- 2.French type doors.
- 3.Doors with Low threshold.
Inward opening doors available in Nordwin profile:
- 1.Single leaf doors.
- 2.French type doors.
- 3.Doors with Low threshold.
Infill panels with various types of plywood surface are used.
The inner layer is 21 mm thick PUR layer (polyurethane foam), having good thermal insulation, homogeneous structure, it is non-flammable and water resistant. |
 |
.jpg)
